Texas Concrete Calculator
Cubic yards, bags of mix, and cost for slabs, footings, and pads. Cost estimates adjusted for Texas — about 18% below the national average.
Last reviewed July 2026 · Free · Nothing you enter is stored
Cubic yards, bags of mix, and cost for slabs, footings, and pads. Cost estimates adjusted for Texas — about 18% below the national average.
Last reviewed July 2026 · Free · Nothing you enter is stored
Texas's overall construction pricing runs about 18% below the national average, based on published location cost factors that blend local labor rates and material prices. This page applies that 0.82 index to the national averages in our concrete calculator, so the material quantities are identical — it's the dollar estimates that shift to Texas levels.
Volume is length × width × thickness converted to cubic yards (divide cubic feet by 27), plus a 10% waste allowance for uneven subgrade and spillage — the standard contractor practice. Bag counts use manufacturer yields: 0.60 cu ft per 80 lb bag, 0.45 cu ft per 60 lb bag. Ready-mix pricing uses the current national average of about $135 per cubic yard delivered (short-load fees can apply under 4 yards).
Construction pricing in Texas runs about 18% below the national average (cost index 0.82 vs. 1.00 national). This calculator applies that factor to 2026 national average prices to produce Texas-adjusted estimates. Local quotes can still vary by metro area, season, and contractor demand.
Labor is the bigger share of installed cost, so in lower-cost states like Texas, professional installation is comparatively affordable — get quotes before committing to DIY. The calculator shows both estimates so you can compare.
No — they're planning estimates: national survey averages adjusted by a published state cost index. Prices differ between cities within Texas, by material grade, and by season. Use these numbers to budget and sanity-check quotes, not to replace them.